Room Temperature Sensor with Setpoint Override
TX1140Description
Remote wall-mount 1000 ohm Platinum RTD sensor with setpoint override. For use with US5182 or SZ2182 Air Handling Unit Controllers.
Accuracy:
+/– 0.35°F
Built-in sensor:
1000 Ω platinum RTD
Zero and span adjustment:
Non-interacting
Operating temperature:
32 to 158°F (0 to 70°C)
Operating humidity:
0 to 100% RH, non-condensing
Supply voltage:
8 to 35 VDC
Input voltage effect:
+/– 0.001 % of span/volt
Output:
One 1000Ω Platinum RTD, One two-wire 4 – 20 mA DC, momentary normally open push-button switch rated 10 mA @35VDC or 24VAC
Maximum over current:
25 mA
Polarity protection:
Diode protected
Specs & Docs
Specifications:
General
Accuracy: +/- 0.35°F
Built-in sensor: 1000 Ω platinum RTD
Zero and span adjustment: Non-interacting
Environmental
Operating temperature: 32 to 158°F (0 to 70°C)
Operating humidity: 0 to 100% RH, non-condensing
Storage temperature: 14 to 176°F (-10 to 80°C)
Electrical
Supply voltage: 8 to 35 VDC
Input voltage effect: +/- 0.001 % of span/volt
Output: One 1000Ω Platinum RTD, One 2-wire 4 to 20 mA DC, momentary normally open push-button switch rated 10 mA @ 35 VDC or 24 VAC
Maximum over current: 25 mA
Polarity protection: Diode protected
Specifications subject to change without notice.